Early Bronco Restoration - Bronco Connection LLC

HomeParts StoreAbout UsLocationBroncos 4 SaleChassisAxlesHow To
Current RestorationsRestoration InformationCompleted Restorations

We know 4x4, that's all we do.
We are happy to announce that we have been growing again. 
Jan 2014 we expanded our usable square footage threefold. 
This enabled us to stock more new and used parts, expand out shop capabilities and add a fabrication dept.

This is a big step in the evolution of Bronco Connection and we owe it all to our great customers.
 We have added employees, services and a much greater parts supply.

We have always believed that "if you are not growing-you are dying".

We are certainly growing!!
We now have a total of 34000 sq ft of shop and warehouse space under one roof.
Thank you for your business!

Check back from time to time and watch our progress!!
We found this former light mfg building that had been flooded and was empty for the last two years.
We have to completely gut the building to re-insulate it. 
When done it will be heated and air conditioned for year round productivity.

Lots of work to be done
We begin on the new internal walls, electrical, air and water systems even before the insulation contractors are finished with the building.
We have more than doubled the size of our parts areas for more inventory and better control.
We have our warehouse organized and we are receiving new inventory nearly everyday.
Our building is very easy to find.
1920 Glenn St Norfolk NE
Just off Hwy 81 south of the Hwy 81/275 intersection.

Our latest addition to our shop equipment is a new wet/dry blasting system by Dustless Blasting. A new 350 blast pot and diesel screw air compressor has cut our blasting time by 70%. We can also blast sheet metal wet to eliminate warping and distortion. This has been a big investment that is paying off big. 

Added to our 1200 sq ft blast room we can now blast day or night, rain or shine!!!
More final assembly room will let us improve efficiency
Fabrication area now includes a new lathe, mill press, magnetic sheet metal brake and band saw. This will help us with all the "one off" parts we build for our restomod trucks.
A new screw air compressor is backed by our old V twin for more than enough air the entire system.
Our area for building chassis, engines, axles and transmission.
We even have room for indoor, climate controlled storage of projects in build progress.
We have built a new 3000 sq ft body shop inside our building.

Our paint booth made the trip and has been installed in the wall of the body shop.
Rough finish side is for prep work
Final finish side, plenty of room to get the job done right
Our new computerized PPG paint mixing system
Sheet metal area entrance
Lots of room here for sheet metal work
Shipping and receiving area
Interior and upholstery area
Our new pipe bender to build custom roll bars and bumpers
We have added a 55 ton iron worker to our fabrication area.